首页/网络/网络设备配置速查/设备重启(reboot / reload)
设备开局与基础配置61 条

设备重启(reboot / reload)

远程重启前必须确认启动配置已保存;思科独有 reload in 定时与 cancel,是改高风险配置时的保命绳,其余两家为即时重启+交互确认。

网络设备配置速查网络更新于 2026-10-12
场景版本生效、故障恢复、割接收尾
适用全部设备
命令族reboot / reload / reboot

华为 VRP

华为 VRP
<SW-CORE-01> reboot
Info: The system is comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the next startup, Continue? [Y/N]: Y
! 重启前先 save 更稳妥

思科 IOS

思科 IOS
SW-CORE-01# reload
System configuration has been modified. Save? [yes/no]: yes
Proceed with reload? [confirm]
! 定时重启:reload in 5 / 取消:reload cancel

H3C Comware

H3C Comware
<SW-CORE-01> reboot
Start to check configuration with next startup configuration file, please wait.....
This command will reboot the device. Continue? [Y/N]: Y
三厂均为交互确认;思科支持 reload in 分钟数(到期自动重启)与 reload cancel,华为/H3C 无等价定时命令,靠变更窗口控制。

易错点

  • 远程重启前漏 save 等于配置自杀,重启后回到旧配置
  • 思科用 reload in 5 保命时,变更成功务必 reload cancel,否则 5 分钟后设备自己重启

数据来源与参考

  • 华为产品文档:设备重启
  • Cisco IOS reload / reload in 命令
  • H3C Comware 7 设备重启

相关工具

​‌‌​​‌​​​‌‌​‌‌‌‌​‌‌​​​‌‌​‌‌‌​​‌‌​​‌​‌‌‌​​‌‌‌​​​‌​‌‌​‌​​‌​‌‌‌​​​‌​‌‌​‌​​‌​‌‌​​​‌‌​‌‌‌​‌​​​‌‌​‌‌‌‌​​‌​‌‌‌​​‌‌​​​‌‌​‌‌​‌‌‌‌​‌‌​‌‌​‌