首页/网络/网络设备配置速查/OSPF 邻居不建立:从 Hello 到区域逐项查
本包目录(508 条)
设备开局与基础配置61 条接口与链路73 条VLAN 与二层交换60 条路由(静态 / OSPF)62 条ACL 与安全65 条NAT 与出口31 条DHCP 与地址服务32 条堆叠、高可用与备份升级52 条
设备排障72 条

OSPF 邻居不建立:从 Hello 到区域逐项查

OSPF 邻居卡在 Init/ExStart/穷举,常见原因:区域号/Hello 参数不匹配、MTU 不一致、认证失败、接口被 ACL 拦。

网络设备配置速查网络更新于 2026-10-12
场景OSPF 邻居起不来或反复震荡
适用三厂通用
命令族ospf peer / neighbor 查看

华为 VRP

华为 VRP
display ospf peer brief
display ospf interface GigabitEthernet0/0/1
display ospf error

思科 IOS

思科 IOS
show ip ospf neighbor
show ip ospf interface GigabitEthernet0/1
show ip ospf statistics

H3C Comware

H3C Comware
display ospf peer
display ospf interface GigabitEthernet1/0/1
display ospf error
差异:华为/H3C 有专门的 display ospf error(统计各类错误包,定位参数不匹配首选);思科看 show ip ospf statistics 与日志。卡 ExStart 优先查 MTU。

易错点

  • 两端的 Hello/Dead 定时器与区域类型必须完全一致;改一侧参数等于重建邻居,震荡期间先只改错的这一端

数据来源与参考

  • 华为 OSPF 命令
  • Cisco OSPF 邻居排障
  • H3C OSPF 命令

相关工具

​‌‌​​‌​​​‌‌​‌‌‌‌​‌‌​​​‌‌​‌‌‌​​‌‌​​‌​‌‌‌​​‌‌‌​​​‌​‌‌​‌​​‌​‌‌‌​​​‌​‌‌​‌​​‌​‌‌​​​‌‌​‌‌‌​‌​​​‌‌​‌‌‌‌​​‌​‌‌‌​​‌‌​​​‌‌​‌‌​‌‌‌‌​‌‌​‌‌​‌