首页/网络/BGP 与广域网速查/Cisco MPLS TE 隧道配置骨架
MPLS 与专线70 条

Cisco MPLS TE 隧道配置骨架

TE 隧道由显式路径 + 隧道接口 + IGP 泛洪扩展组成:配置 tunnel mode mpls traffic-eng 与 path-option 后,由 RSVP 协商建立 LSP。

BGP 与广域网速查网络更新于 2026-10-12
显式路径ip explicit-path name <名> + next-address 逐跳指定
隧道接口interface Tunnel0 + tunnel mode mpls traffic-eng
关键参数tunnel destination / mpls traffic-eng bandwidth / path-option
前提全网启用 mpls traffic-eng tunnels 与 IGP TE 扩展

配置骨架

配置骨架
mpls traffic-eng tunnels
!
ip explicit-path name P-TO-R2
 next-address 10.0.0.2
 next-address 10.0.1.2
!
interface Tunnel0
 ip unnumbered Loopback0
 tunnel mode mpls traffic-eng
 tunnel destination 2.2.2.2
 tunnel mpls traffic-eng bandwidth 10000
 tunnel mpls traffic-eng path-option 10 explicit name P-TO-R2
!
show mpls traffic-eng tunnels tunnel0

易错点

  • path-option 引用的显式路径缺跳:RSVP 无法预留到目的地
  • IGP 未开 TE 扩展:可泛洪的 TE 属性缺失,路径计算异常

数据来源与参考

  • Cisco: MPLS TE 配置指南
  • RFC 3209: RSVP-TE
​‌‌​​‌​​​‌‌​‌‌‌‌​‌‌​​​‌‌​‌‌‌​​‌‌​​‌​‌‌‌​​‌‌‌​​​‌​‌‌​‌​​‌​‌‌‌​​​‌​‌‌​‌​​‌​‌‌​​​‌‌​‌‌‌​‌​​​‌‌​‌‌‌‌​​‌​‌‌‌​​‌‌​​​‌‌​‌‌​‌‌‌‌​‌‌​‌‌​‌