首页/网络/网络设备配置速查/接口流量与错包统计查看
本包目录(508 条)
设备开局与基础配置61 条
接口与链路73 条
VLAN 与二层交换60 条路由(静态 / OSPF)62 条ACL 与安全65 条NAT 与出口31 条DHCP 与地址服务32 条堆叠、高可用与备份升级52 条设备排障72 条

接口流量与错包统计查看

判断链路健康状况看三类数字:吞吐量、错误计数(CRC/丢包)、丢弃;三厂都在接口详细输出或专门计数命令里给全。

网络设备配置速查网络更新于 2026-10-12
场景链路健康巡检、带宽评估
适用全部设备
命令族display interface 或 display counters / show interfaces counters errors / display interface counters

华为 VRP

华为 VRP
<Huawei> display interface GigabitEthernet 0/0/1
Input: 123456789 bytes, 987654 packets
  Unicast: 987000, Multicast: 654, Broadcast: 0
  Input error: 0
Last 300 seconds input rate: 123456 bits/sec, 456 packets/sec

思科 IOS

思科 IOS
SW-CORE-01# show interfaces counters errors
Port        Align-Err    FCS-Err   Xmit-Err    Rcv-Err  UnderSize
Gi1/0/1             0          0          0          0          0
# 单口:show interfaces Gi1/0/1 | include rate|errors|CRC

H3C Comware

H3C Comware
<H3C> display interface GigabitEthernet 1/0/1
Input (total):  123456 packets, 78901234 bytes
  Input (normal): 123456 packets, - bytes
  Input errors: 0, runts: 0, giants: 0
Last 300 seconds input rate: 1024 bits/sec, 1 packets/sec
思科的 show interfaces counters errors 适合一键巡检全端口错误统计;华为/H3C 用 display interface 逐口看或配合 | include error 批量过滤。CRC/FCS 计数增长是物理层问题,丢包(discard/output drops)则可能是拥塞。

易错点

  • 把历史上的千万级计数当成现网问题:先清零再观察增量才有意义
  • inErrors 不区分原因:CRC 是线路、runts 是短帧(可能双工不匹配)、giants 是超长帧

数据来源与参考

  • 华为产品文档:接口统计
  • Cisco show interfaces counters errors
  • H3C Comware 7 接口统计命令

相关工具

​‌‌​​‌​​​‌‌​‌‌‌‌​‌‌​​​‌‌​‌‌‌​​‌‌​​‌​‌‌‌​​‌‌‌​​​‌​‌‌​‌​​‌​‌‌‌​​​‌​‌‌​‌​​‌​‌‌​​​‌‌​‌‌‌​‌​​​‌‌​‌‌‌‌​​‌​‌‌‌​​‌‌​​​‌‌​‌‌​‌‌‌‌​‌‌​‌‌​‌